1000 mAh, USB-C
Rechargeable and non-swappable. Run it plugged in or move it around.
Room capture
MEMS microphone tuned for table distance rather than close talking.
Note taking
Point it at your stack and briefings land wherever you send them, in whatever form your models produce.
Any language
Language ability comes from your models, not the hardware. It speaks whatever your stack speaks.
Your AI
Configurable endpoint, device behaviour tuned per use case from the console. Built to embed in the voice AI project you already have.
The room's microphone for your voice AI
QuickComm Table Top v3 · SKU QC-TT-V3
Line total
$90
Volume pricing
A development kit for engineers, developers and builders. Ships pre-flashed and streams to the endpoint you configure from the console: point it at your own backend, run your own stack, and it slots into the voice AI project you already have, with no per-channel fees and no lock-in.
The same path on all three devices. Only where the microphone sits changes.
Press to talk. Nothing is captured until then.
16 kHz mono over Wi-Fi. Silence never streams.
Clean, framed utterances arrive at your endpoint.
Your agent, your rules, on your infrastructure.
Answers spoken back, records kept, in real time.
SAME STACK, DIFFERENT BODY: identical radio, codec and streaming pipeline as the Earpiece, in a unit that sits on a desk and never needs charging.
BUILT FOR ROOM CAPTURE: leave it running through a briefing, a handover or a front-desk shift and your stack receives the whole room, cleanly captured and framed.
RECHARGEABLE, NOT TETHERED: a 1000 mAh internal battery charged over USB-C. Leave it plugged in for permanent rooms, or move it to wherever the conversation is happening.
DESK OR WALL: sits flat on a table, or mounts on a wall for corridors, entrances and control rooms where desk space is not the point.
STATUS AT A GLANCE: the on-device display shows its network, firmware and table assignment at arm's length, with two physical buttons, a status LED and an integrated speaker for two-way use.
MADE TO BE EMBEDDED: streams push-to-talk-framed 16 kHz audio to the endpoint you configure, so it drops straight into the voice AI project you already have.
BUILD YOUR OWN VOICE AI ON IT: off-the-shelf hardware you can make your own. Configure the stream endpoint, run your own models, and tune how the device behaves from the console. It is built to embed in the project you already have.
ONE CONSOLE: provisioned, monitored and updated over the air from the same fleet console as every other QuickComm device.
| Battery | 1000 mAh rechargeable, internal |
|---|---|
| Swappable | No. Charged in place over USB-C |
| Charging | USB-C |
| Mains operation | Runs indefinitely while connected |
| Controls | Two physical buttons |
|---|---|
| Display | On-device status display: network, firmware and assignment |
| Status | LED indicator |
| Audio out | Integrated speaker |
| Microphone | Digital MEMS, tuned for room distance |
| Form factor | Rounded rectangular unit |
|---|---|
| Mounting | Free-standing on a desk or table, or wall mounted |
| Orientation | Upward-facing microphone and speaker when desk mounted |
| Housing | Matte soft-touch polymer |
| Wi-Fi | 802.11 b/g/n, 2.4 GHz, integrated antenna |
|---|---|
| Bluetooth | Bluetooth 5.2 (BLE) |
| Stream transport | QuickComm udp-v1 push-to-talk wire protocol |
| Packet resilience | Self-describing packets, per-boot session keys, loss tolerant |
| Provisioning | QR-code pairing with MAC-based device identity |
| Microphone | Digital MEMS microphone |
|---|---|
| Audio codec | 24-bit ADC/DAC |
| Capture format | 16 kHz PCM, mono |
| Gating | Push-to-talk framed. Silence is never streamed |
| Pre-roll buffer | Yes. The first syllable of a transmission is never clipped |
| Edge processing | On-device voice activity detection and wake handling |
| Flash memory | 8 MB |
|---|---|
| Firmware updates | Over-the-air, staged rollouts from the fleet console |
| Remote management | Remote commands, health telemetry, offline detection |
| Backend | Yours: the stream endpoint is configurable from the console |
|---|---|
| Firmware | Ships pre-flashed; device behaviour is configured per use case from the console |
| Voice AI stack | Bring your own STT, LLM, wake word and TTS |
| On-device logic | 8 MB flash with on-device voice activity detection built in |
| Hardware platform | Standard, well-documented parts, with no proprietary ASIC to design around |
| Warranty | 12 months limited hardware warranty |
|---|---|
| Designed & engineered | Dubai, UAE (in5 Tech, Dubai Design District) |
| Manufacturer | Quickgen Technologies |
| IP status | Patent pending |
Custom hardware for any voice AI application
Point the Table Top at your own backend and tune it for your use case from the console.
Every unit ships pre-flashed with QuickComm firmware, ready out of the box. Nothing is ever reflashed in the field.
Pick how the device behaves for your use case, then set the stream endpoint to your own infrastructure.
The audio goes where you send it. Bring your own speech-to-text, models, wake word and text-to-speech.
On-device intelligence. 8 MB of flash and voice activity detection keep capture clean before a byte leaves the device.
Always current. Staged over-the-air updates, with fleet health telemetry behind them.
No provider lock-in. Nothing about the hardware ties you to a particular AI provider.
Answered by the QuickComm engineering team.
Something not covered here? Ask us directly. We answer hardware questions before you buy, not after.
QC-EP-V3
$220
per unit
A wearable voice AI terminal for the assistant, agent or comms project you are building. Press to talk, so it listens when you ask it to and not before.
Best for: Team communication, meeting capture and personal assistant projects
QC-BN-V3
$125
per unit
Plugs into the audio jack of any device: radio, handset, intercom, PA or console. Two-way mic and speaker, streaming straight to your backend to feed whatever you run there.
Best for: Any audio source you want feeding your voice AI
